H O M E H I S T O R Y M A P E M E R G E N C Y S E R V I C E C O N T A C T
   
  Products
   
  CDB 1014A - Download Printer-Friendly Version
  Caliper Disc Brake - Acrobat Reader Required
   
  PT Tech's new CDB0812A replaces 8" drum brakes and conforms to the new AISE brake standard.
   
 
  • Spring applied
  • Electrically released
  • Operates in series with DC motors
  • Installation requires no modification*
  • 14" inch disc replaces an 10" wheel
 
 
PT Tech's new CDB1014A replaces existing 10" drum brakes and conforms to the new AISE brake standard.
1) Wear adjustment is far easier.
2) Less frequent need for wear adjustments.
3) Improved wear life.
4) Replacing friction pucks is substantially quicker.
5) A set of friction pucks weighs only 4½ pounds.
6) Eliminates drag and slip problems due to drum
thermal expansion.
7) Significantly better resistance to heat checking.

PT Tech supports its commitment to excellent fieldservice with a large inventory of parts and a 24 -hour emergency service hotline at 800-717- 4358.
 
LIFTING MADE EASY
Lifting hole is cast into the magnetic body. It is positioned to provide a balanced load, allowing for ease of brake installation.
 
 
TORQUE ADJUST
Brake torque is adjustable from 100% (200 lb-ft) down to 50% (100 lb-ft) and is visually verifiable. The number of washers under the bolt head determines torque setting.
 
 
WEAR ADJUST
Adjusting for wear is easy. When the armature gap indicator has recessed approximately 1/16", loosen jam nut, turn adjuster nut until indicator is flush, and then re-tighten jam nut.
 
 
 
FRICTION MATERIAL REPLACEMENT
Caliper arms swing up exposing friction pucks for easy removal and replacement.
 
 
ARM DESIGN
Floating arm design allows for axial movement of DC motors. This prevents drag problems that are common to directly applied caliper disc hoist brakes.
 
 
PATENTED SLOTTED BASE
Slotted base allows the CDB1014A to be installed fully assembled. Installation requires no modification. Mounting bolt hole pattern matches existing drum brake and conforms to the new AISE brake standard.
 
- Enlarge Image
Click Page to View.
Page 1
Page 2
 
   
  NEXT »
   
TELEPHONE: 330.239.4933  |  FAX 330.239.2012
1441 WOLF CREEK TRAIL  |  P.O. BOX 305  |  SHARON CENTER, OH USA  44274-0305
Torque Limiters  |  Hydraulic Brakes  |  Conveyor Brakes  |  HPTO Diesel Engine Clutches  |  Caliper Disc Brakes 
History  |  Map  |  Emergency Service  |  Contact  |  Site Map  |  Home